MIC2583R-MYQS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-QSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Feature | Auto Retry |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 2.3V~13.2V |
| Depth | 3.91mm |
| Base Part Number | MIC2583 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 1.5mA |
| Max Supply Current | 2.5mA |
| Current - Supply | 1.5mA |
| Internal Switch(s) | No |
| Programmable Features | Fault Timeout, Slew Rate, UVLO |
| Feature Pins | CFILTER, CPOR, DIS, /FAULT, FB, ON, /POR, PWRGD |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2583R-MYQS Overview
This is included in the 16-SSOP (0.154, 3.90mm Width) package.As of now, 1 channels are available.A Tube-shaped package holds it.There is a Surface Mount-like arrangement.Hot Swap Controller?is?the?classification?for?this?electrical?component.Ensure reliable operation by setting the temperature to -40°C~85°C.There are General Purpose applications on the device.An article about it appears in Auto Retry.In the case of a 2.3V~13.2VV power source, it should work just fine.Numbers in the MIC2583 family include it.A 16 pin is used for operation.Hot-swappable device has Fault Timeout, Slew Rate, UVLO programmable features.Presently, 1.5mA is in short supply.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is possible to maintain stable operation at a maximum temperature of 85°C°C.The system must function at a minimum temperature of -40°C degrees Celsius in order to maintain its reliability.Hot Swap is set by default to output 1.An input voltage of 13.2VV is the maximum it can handle.Low supply voltages, such as 2.3VV, can be used.1.5mA is the operative supply current.The maximum current required for its operation is {0}.
MIC2583R-MYQS Features
Features of Auto Retry
Programmable features of Fault Timeout, Slew Rate, UVLO
MIC2583R-MYQS Applications
There are a lot of Microchip Technology MIC2583R-MYQS hot swap controllers applications.
- Base station
- DC boost circuit
- Redundant Array of Disks (RAID)
- Hard drive
- Undervoltage protection
- Other forms of communications infrastructure
- Industrial high-side switches
- Power supply hotswap & inrush control
- Central office switching systems
- Network switch
