MIC2585-1JYTS
| Parameters | |
|---|---|
| Internal Switch(s) | No |
| Programmable Features | Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | CDLY, CFILTER, CPOR, DIS1, DIS2, /FAULT, FB1, FB2, ON, OV1, OV2, PG1, PG2, /POR, TRK |
| Length | 7.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | 24-TSSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Feature | Latched Fault |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller, Sequencer |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 1V~13.2V |
| Depth | 4.4mm |
| Base Part Number | MIC2585 |
| Number of Outputs | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.7mA |
| Max Supply Current | 3mA |
| Current - Supply | 1.7mA |
MIC2585-1JYTS Overview
You can find it in the 24-TSSOP (0.173, 4.40mm Width) package.Hot-swappable device is currently possible to access 2 channels.Tube-shaped packaging is used for this product.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller, Sequencer.A temperature setting of -40°C~85°C will ensure reliable operation.There are General Purpose applications available for the device.The article appears in Latched Fault.Hot-swappable device should be able to work wHot-swappable deviceh a 1V~13.2VV power source.The number MIC2585 belongs to the MIC2585 family.A 24 pin is used for operation.Fault Timeout, OVP, Slew Rate, UVLO is the number of features it can be programmed with.Presently, 1.7mA is in short supply.There is a Surface Mount-axis orientation to it.For stable operation, the maximum operating temperature should be 85°C°C.At a minimum working temperature of -40°C degrees Celsius, it maintains reliability.In default mode, it outputs 2.A maximum supply voltage of 13.2VV can be handled by it.Hot Swap can work wHot Swaph as low a supply voltage as feasible, such as 1VV.In this case, 1.7mA is the operative supply current.The maximum current required for its operation is {0}.
MIC2585-1JYTS Features
Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO
MIC2585-1JYTS Applications
There are a lot of Microchip Technology MIC2585-1JYTS hot swap controllers applications.
- Overcurrent protection
- Storage network
- Telecom server
- Backplane
- Network router
- Solid state circuit breakers
- Servers
- Network switches
- Firewire
- Continuous monitoring of device temperature
