banner_page

MIC2585-1JYTS-TR

Tape & Reel (TR) Obsolete 2 Surface Mount Hot Swap Controllers 1.7mA mA Latched Fault 24-TSSOP (0.173, 4.40mm Width) 2 General Purpose Hot Swap Controller, Sequencer


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2585-1JYTS-TR
  • Package: 24-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 703
  • Description: Tape & Reel (TR) Obsolete 2 Surface Mount Hot Swap Controllers 1.7mA mA Latched Fault 24-TSSOP (0.173, 4.40mm Width) 2 General Purpose Hot Swap Controller, Sequencer (Kg)

Details

Tags

Parameters
Base Part Number MIC2585
Number of Outputs 2
Number of Channels 2
Max Supply Voltage 13.2V
Min Supply Voltage 1V
Operating Supply Current 1.7mA
Current - Supply 1.7mA
Internal Switch(s) No
Programmable Features Fault Timeout, OVP, Slew Rate, UVLO
Feature Pins CDLY, CFILTER, CPOR, DIS1, DIS2, /FAULT, FB1, FB2, ON, OV1, OV2, PG1, PG2, /POR, TRK
Length 7.8mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Number of Pins 24
Supplier Device Package 24-TSSOP
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Feature Latched Fault
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Hot Swap Controller, Sequencer
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Applications General Purpose
Voltage - Supply 1V~13.2V
Depth 4.4mm

MIC2585-1JYTS-TR Overview


Package 24-TSSOP (0.173, 4.40mm Width) includes it.Currently, there are 2 channels accessible.Tape & Reel (TR)-shaped packaging is used.It's?set?up?in?the?way?of?Surface Mount.Electric components of this type are classified as Hot Swap Controller, Sequencer.If you want reliable performance, you should set the temperature to -40°C~85°C.There are General Purpose applications on the device.The article appears in Latched Fault.Hot-swappable device should be able to work wHot-swappable deviceh a 1V~13.2VV power source.The number MIC2585 belongs to the MIC2585 family.This device uses 24 pins for operation.There are Fault Timeout, OVP, Slew Rate, UVLO features that can be programmed.Currently, 1.7mA is in short supply.Surface Mount is its direction of movement.The maximum operating temperature of 85°C°C allows for stable operation.At a minimum working temperature of -40°C degrees Celsius, it maintains reliability.Hot Swap is set by default to output 2.An input voltage of 13.2VV is the maximum it can handle.Using low supply voltages, such as 1VV, is feasible.Its operative supply current is 1.7mA.

MIC2585-1JYTS-TR Features


Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO

MIC2585-1JYTS-TR Applications


There are a lot of Microchip Technology MIC2585-1JYTS-TR hot swap controllers applications.

  • Circuit breakers for electronic circuits
  • Switch
  • Industrial
  • Power supply hotswap & inrush control
  • Network switch
  • Continuous monitoring of device temperature
  • Load transient protection
  • Modern analog communication
  • Hard drive
  • Datacom

Write a review

Note: HTML is not translated!
    Bad           Good