MIC2585-2JYTS
| Parameters | |
|---|---|
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 1.7mA |
| Current - Supply | 1.7mA |
| Internal Switch(s) | No |
| Programmable Features | Fault Timeout, OVP, Slew Rate, UVLO |
| Feature Pins | CDLY, CFILTER, CPOR, DIS1, DIS2, /FAULT, FB1, FB2, ON, OV1, OV2, PG1, PG2, /POR, TRK |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Supplier Device Package | 24-TSSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Feature | Latched Fault |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller, Sequencer |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 1V~13.2V |
| Depth | 4.4mm |
| Base Part Number | MIC2585 |
| Number of Outputs | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 13.2V |
MIC2585-2JYTS Overview
The 24-TSSOP (0.173, 4.40mm Width) package contains it.Currently, 2 channels can be accessed.A Tube-shaped package holds it.Surface Mount is set up this way.An electrical component classified as Hot Swap Controller, Sequencer belongs to this category.If you want reliable performance, you should set the temperature to -40°C~85°C.Hot-swappable device has General Purpose applications.Hot-swappable device is featured in Latched Fault.The device should be able to be powered by a 1V~13.2VV power source.MIC2585 is a family of numbers.A 24 pin is used for operation.There are Fault Timeout, OVP, Slew Rate, UVLO features that can be programmed.Hot-swappable device is estimated that there is a current supply of 1.7mA.Positioned in direction of Surface Mount, it is at a right angle.In order to ensure stable operation, a maximum operating temperature of 85°C°C must be set.Maintaining reliability requires a minimum working temperature of -40°C degrees Celsius.Hot Swap is defaulted to output 2.13.2VV is the maximum supply voltage it can handle.As low a supply voltage as possible, such as 1VV, is possible.There is a supply current of 1.7mA.
MIC2585-2JYTS Features
Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO
MIC2585-2JYTS Applications
There are a lot of Microchip Technology MIC2585-2JYTS hot swap controllers applications.
- Solid state circuit breakers
- Current monitor output
- Circuit power protectors
- Short circuit protection
- Telecom server
- High power circuit board
- Base station
- Servers
- Avionics systems
- Redundant negative voltage supplies
