Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Feature |
Latched Fault |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
Hot Swap Controller |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Applications |
General Purpose |
Voltage - Supply |
10V~80V |
Depth |
3.94mm |
Base Part Number |
MIC2587 |
Number of Outputs |
1 |
Number of Channels |
1 |
Max Supply Voltage |
80V |
Min Supply Voltage |
10V |
Operating Supply Current |
2mA |
Nominal Supply Current |
2mA |
Power Dissipation |
319mW |
Max Supply Current |
5mA |
Current - Supply |
2mA |
Internal Switch(s) |
No |
Programmable Features |
Current Limit, Fault Timeout, Slew Rate, UVLO |
Feature Pins |
FB, ON, /PWRGD, TIMER |
Length |
4.93mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC2587-2YM Overview
There is a 8-SOIC (0.154, 3.90mm Width) package that includes this.As of now, 1 channels are available.The package resembles a Tube.As Surface Mount would say, it's set up like that.An electrical component classified as Hot Swap Controller belongs to this category.The temperature should be set to -40°C~85°C to ensure reliable functioning.General Purpose applications are available on the device.An article about it appears in Latched Fault.Hot-swappable device should be able to work wHot-swappable deviceh a power source of 10V~80VV.This number is a member of the MIC2587 family.This device operates by using 8 pins.Current Limit, Fault Timeout, Slew Rate, UVLO features are programmable.In the present, there is a shortage of 2mA.Positioned in direction of Surface Mount, it is at a right angle.The maximum operating temperature of 85°C°C allows for stable operation.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.Hot Swap is set by default to output 1.A maximum supply voltage of 80VV can be handled by it.If necessary, it can work with a low supply voltage, such as 10VV.In this case, 2mA is the operative supply current.Hot Swap requires a maximum current of 5mA to operate.
MIC2587-2YM Features
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, Slew Rate, UVLO
MIC2587-2YM Applications
There are a lot of Microchip Technology MIC2587-2YM hot swap controllers applications.
- Hard drive
- Disconnect faulty loads before supply voltage drops
- Power monitoring
- Firewire
- Circuit breakers for electronic circuits
- Reverse current protection
- Active current limit
- Temperature monitor output
- Safe board insertion and extraction
- Short-circuit protection in real time