Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2005 |
Feature |
Fault Timeout, Latched Fault |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
Hot Swap Controller |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Applications |
-48V |
Voltage - Supply |
-80V~-19V |
Depth |
3.94mm |
Base Part Number |
MIC2588 |
Number of Outputs |
1 |
Number of Channels |
1 |
Max Supply Voltage |
-80V |
Min Supply Voltage |
-19V |
Operating Supply Current |
3mA |
Max Supply Current |
5mA |
Current - Supply |
3mA |
Internal Switch(s) |
No |
Programmable Features |
Current Limit, OVP, Slew Rate, UVLO |
Feature Pins |
DRAIN, OV, PWRGD, UV |
Length |
4.93mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC2588-1YM Overview
In the 8-SOIC (0.154, 3.90mm Width) package you will find it.At the moment, there are 1 channels available.Hot-swappable device comes in the shape of a Tube.According to Surface Mount, it has been set up.In electrical components, Hot Swap Controller is the classification.The temperature should be set to -40°C~85°C to ensure reliable functioning.There are -48V applications available for the device.An article about it appears in Fault Timeout, Latched Fault.In theory, it should work as long as the power source has a -80V~-19VV input.MIC2588 is a family of numbers.Hot-swappable device is necessary to use 8 pins in order to operate the device.Hot-swappable device has Current Limit, OVP, Slew Rate, UVLO programmable features.3mA is currently in short supply.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.For stable operation, the maximum operating temperature should be 85°C°C.At a minimum working temperature of -40°C degrees Celsius, it maintains its reliability.Hot Swap is set to output 1 by default.A maximum supply voltage of -80VV can be handled by it.Using low supply voltages, such as -19VV, is feasible.There is a supply current of 3mA.Its maximum current requirement is 5mA.
MIC2588-1YM Features
Features of Fault Timeout, Latched Fault
Programmable features of Current Limit, OVP, Slew Rate, UVLO
MIC2588-1YM Applications
There are a lot of Microchip Technology MIC2588-1YM hot swap controllers applications.
- Continuous monitoring of device temperature
- Datacom
- Raid
- Safe board insertion and extraction
- PC board hot swap insertion and removal
- Industrial computers and servers
- Load transient protection
- Inrush current control
- Storage network
- Redundant Array of Disks (RAID)