MIC2588-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Feature | Fault Timeout, Latched Fault |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | -48V |
| Voltage - Supply | -80V~-19V |
| Depth | 3.94mm |
| Base Part Number | MIC2588 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 80V |
| Min Supply Voltage | 19V |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Max Supply Current | 5mA |
| Current - Supply | 3mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, OVP, Slew Rate, UVLO |
| Feature Pins | DRAIN, OV, /PWRGD, UV |
| Length | 4.93mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2588-2YM Overview
There is a 8-SOIC (0.154, 3.90mm Width) package that includes this.In the current state, 1 channels are accessible.The package resembles a Tube.Surface Mount sets it up.Hot-swappable device is classified as a Hot Swap Controller electrical component.Ensure reliable operation by setting the temperature to -40°C~85°C.The device has -48V applicationsAs you can see in Fault Timeout, Latched Fault, it's featured.Using a -80V~-19VV power source should be able to power the device.Hot-swappable device belongs to the MIC2588 family of numbers.This device uses 8 pins for operation.The programmable features of this device are Current Limit, OVP, Slew Rate, UVLO.There is currently an adequate supply of 3mA.Positioned in direction of Surface Mount, it is at a right angle.For stable operation, the maximum operating temperature should be 85°C°C.Hot-swappable device works at a minimum temperature of -40°C degrees Celsius to maintain reliabilHot-swappable devicey.The default setting is output 1.Maximum supply voltage is 80VV.Using a low supply voltage, such as 19VV, will be feasible.Hot Swap is 3mA which is the operative supply current.Its maximum current requirement is 5mA.
MIC2588-2YM Features
Features of Fault Timeout, Latched Fault
Programmable features of Current Limit, OVP, Slew Rate, UVLO
MIC2588-2YM Applications
There are a lot of Microchip Technology MIC2588-2YM hot swap controllers applications.
- Base station power distribution system
- Hard drive
- Reverse current protection
- Storage network
- Modern analog communication
- Temperature monitor output
- Supply voltage monitoring
- Safe board insertion and extraction
- Redundant Array of Disks (RAID)
- Short-circuit protection in real time
