banner_page

MIC2589-2YM-TR

Tape & Reel (TR) Obsolete 1 Surface Mount Hot Swap Controllers 4mA mA Latched Fault 14-SOIC (0.154, 3.90mm Width) 1 -48V Hot Swap Controller, Sequencer


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2589-2YM-TR
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 703
  • Description: Tape & Reel (TR) Obsolete 1 Surface Mount Hot Swap Controllers 4mA mA Latched Fault 14-SOIC (0.154, 3.90mm Width) 1 -48V Hot Swap Controller, Sequencer (Kg)

Details

Tags

Parameters
Number of Channels 1
Max Supply Voltage -80V
Min Supply Voltage -19V
Operating Supply Current 4mA
Current - Supply 4mA
Internal Switch(s) No
Programmable Features Current Limit, Fault Timeout, OVP, UVLO
Feature Pins CFILTER, CNLD, DRAIN, PGTIMER, OV, /PWRGD1, /PWRGD2, /PWRGD3, UV
Length 8.64mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Supplier Device Package 14-SOIC
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2006
Feature Latched Fault
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Hot Swap Controller, Sequencer
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Applications -48V
Voltage - Supply -80V~-19V
Depth 3.9mm
Base Part Number MIC2589
Number of Outputs 1

MIC2589-2YM-TR Overview


Package 14-SOIC (0.154, 3.90mm Width) includes it.Hot-swappable device is currently possible to access 1 channels.It's packaged in a Tape & Reel (TR) shape.In the way of Surface Mount, it's set up.In electrical components, Hot Swap Controller, Sequencer is the classification.For reliable performance, the temperature should be set to -40°C~85°C.There are -48V applications on the device.In Latched Fault, it is featured.If the power source is -80V~-19VV, it should work fine.The number MIC2589 belongs to the MIC2589 family.A 14 pin is used for operation.The programmable features of this device are Current Limit, Fault Timeout, OVP, UVLO.There is currently an adequate supply of 4mA.Positioned in direction of Surface Mount, it is at a right angle.Operating at 85°C°C allows for stable operation.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of -40°C degrees Celsius.By default, it produces output 1.-80VV is the maximum supply voltage it can handle.If necessary, it can work with a low supply voltage, such as -19VV.Its operative supply current is 4mA.

MIC2589-2YM-TR Features


Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, UVLO

MIC2589-2YM-TR Applications


There are a lot of Microchip Technology MIC2589-2YM-TR hot swap controllers applications.

  • Board or blade insertion into live backplanes
  • Hard drive
  • Automatic restart after load failure
  • Circuit breakers for high-side circuits
  • Industrial
  • Storage network
  • Active current limit
  • Limitting the inrush current
  • Overcurrent protection
  • ISDN system

Write a review

Note: HTML is not translated!
    Bad           Good