MIC2589R-2YM-TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Feature | Auto Retry |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller, Sequencer |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | -48V |
| Voltage - Supply | -80V~-19V |
| Depth | 3.9mm |
| Base Part Number | MIC2589 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | -80V |
| Min Supply Voltage | -19V |
| Operating Supply Current | 4mA |
| Current - Supply | 4mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, UVLO |
| Feature Pins | CFILTER, CNLD, DRAIN, PGTIMER, OV, /PWRGD1, /PWRGD2, /PWRGD3, UV |
| Length | 8.64mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2589R-2YM-TR Overview
You can find it in the 14-SOIC (0.154, 3.90mm Width) package.In the current state, 1 channels are accessible.It's packaged in a Tape & Reel (TR) shape.Surface Mount sets it up.Hot-swappable device is classified as a Hot Swap Controller, Sequencer electrical component.To ensure reliable operation, the temperature should be set to -40°C~85°C.-48V applications can be downloaded from the device.There is a reference to it in Auto Retry.If the power source is -80V~-19VV, it should work fine.There are numbers in the MIC2589 family that include it.During operation, 14 pins are used.There are Current Limit, Fault Timeout, OVP, UVLO features that can be programmed.There is currently an adequate supply of 4mA.Positioned in direction of Surface Mount, it is at a right angle.The maximum operating temperature of 85°C°C allows for stable operation.For reliability, it must work at a minimum temperature of -40°C degrees Celsius.As a default, it's set to output 1.A maximum supply voltage of -80VV can be handled by it.Using a low supply voltage, such as -19VV, will be feasible.Currently, 4mA is the supply current.
MIC2589R-2YM-TR Features
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
MIC2589R-2YM-TR Applications
There are a lot of Microchip Technology MIC2589R-2YM-TR hot swap controllers applications.
- Redundant Array of Disks (RAID)
- Modern analog communication
- Data communication systems
- Server backplane system
- Disconnect faulty loads before supply voltage drops
- Circuit breakers for high-side circuits
- Network switches
- Industrial high-side switches
- Safe board insertion and extraction
- Current monitor output
