MIC2790N-04VMT-T5
| Parameters | |
|---|---|
| Output | Open Drain or Open Collector |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Operating Supply Current | 50μA |
| Accuracy | 1 % |
| Reset | Active Low |
| Voltage - Threshold | 0.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 1.2 s |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Number of Pins | 6 |
| Supplier Device Package | 6-TDFN (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2790 |
MIC2790N-04VMT-T5 Overview
Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. For your reference, this PMIC includes a list of 6-UFDFN Exposed Pad functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. There are 6 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.5V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TJ. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 50μA. A similar IC managements number of the manufacturer can always be found by using MIC2790, the base power ics number. On the power management, there are a total of 1 inputs that are monitored.
MIC2790N-04VMT-T5 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.5V
50μA operating supply current
MIC2790N-04VMT-T5 Applications
There are a lot of Microchip Technology MIC2790N-04VMT-T5 Voltage Supervisors applications.
- Stable power system
- Embedded computing
- Network equipment
- emergency room
- Consumer electronics
- Urban rail transit weak current power monitoring
- Cloud computing
- Detection of phase sequence
- Medical-specific insulation monitor
- DC stabilized power supply module
