MIC2844AYMT-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFDFN Exposed Pad, 10-TMLF® |
| Number of Pins | 10 |
| Supplier Device Package | 10-TMLF® (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Linear |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight, Camera Flash |
| Base Part Number | MIC2844A |
| Number of Outputs | 6 |
| Output Voltage | 5.5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current per Channel | 20mA |
| Current - Output / Channel | 20mA |
| Internal Switch(s) | Yes |
| Dimming | Single-Wire |
| Number of Segments | 5 |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 3V |
| Height | 550μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2844AYMT-TR Overview
The 10-UFDFN Exposed Pad, 10-TMLF? package conserves board space. LED drivers are designed with 6 outputs.Mounting is done according to the Surface Mount method.The system emerges as a Linear with high efficiency.At -40°C~125°C TJ, the led driver is capable of operating.The benefits are considerable for Backlight, Camera Flash.The configuration of the board is built around 10 pins.Undetermined failures may occur when the voltage supply is less than 3V.5 segments are present.As you can see, it is mounted by Surface Mount.It is under the base part number MIC2844A that the LED driver can be found.It is acceptable to supply voltages of 5.5V.An optimal value of supply voltage is 5.5V.For maximum efficiency, it operates at the minimal voltage of 3V.Temperatures should not exceed 125°C in order to ensure stable operation.It is essential to maintain a temperature greater than -40°C in order to achieve stable operation.This device has a voltage output of 5.5V volts.
MIC2844AYMT-TR Features
Available in the 10-UFDFN Exposed Pad, 10-TMLF? package
Operating temperature of -40°C~125°C TJ
Output voltage of 5.5V
MIC2844AYMT-TR Applications
There are a lot of Microchip Technology MIC2844AYMT-TR LED Driver ICs applications.
- Amusement Machines
- High-end retail lighting
- Down lighting
- Linear fluorescent
- White LED Backlight for portable equipment
- Architectural lighting
- Flicker-free LED Lighting using R1580N
- Dimmable LED for vehicle interiors
- Sports Facility Lighting
- Other Electronic Devices
