banner_page

MIC2981/82BWM

Bipolar 1.27mm PMIC MIC2981/82 35V 18-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2981/82BWM
  • Package: 18-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 810
  • Description: Bipolar 1.27mm PMIC MIC2981/82 35V 18-SOIC (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 18-SOIC (0.295, 7.50mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2005
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 18
ECCN Code EAR99
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 8
Supply Voltage 35V
Terminal Pitch 1.27mm
Base Part Number MIC2981/82
Number of Outputs 8
Output Type Bipolar
Supply Voltage-Max (Vsup) 50V
Supply Voltage-Min (Vsup) 5V
Interface On/Off
Current - Output (Max) 500mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5V~50V
Turn On Time 2 μs
Output Peak Current Limit-Nom 0.35A
Turn Off Time 10 μs
Built-in Protections TRANSIENT
Output Current Flow Direction SOURCE
Height Seated (Max) 2.616mm
Width 7.5945mm
RoHS Status Non-RoHS Compliant

MIC2981/82BWM Overview


As you can see, it's packaged in the way of a Tube.There is a 18-SOIC (0.295, 7.50mm Width) package that includes it.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has a total of 8 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is Bipolar volts.It comes under the family of MIC2981/82.It has a total of 18 terminations.The LED driver has 8 functions.In terms of output, the lighting driver can provide a maximum of 500mA V.High efficiency is possible at 35V supply voltage.In this case, Vsup (maximum supply voltage) is set to 50V.For normal operation, the supply voltage (Vsup) should be kept above 5V.

MIC2981/82BWM Features


Supplied from 35V

MIC2981/82BWM Applications


There are a lot of Microchip Technology MIC2981/82BWM Power Switches ICs applications.

  • Wearable Devices
  • Wireless/Networking Cards
  • Portable Music Players
  • Various applications equipped with buttons
  • Wireless Modem Data Cards
  • Wireless Headsets
  • Hot Swap
  • Portable GPS
  • Set-top-box
  • USB Protection

Write a review

Note: HTML is not translated!
    Bad           Good