MIC2981/82YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | LG-MAX |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MIC2981/82 |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
| Turn On Time | 2 μs |
| Number of Output Lines | 8 |
| Output Peak Current Limit-Nom | 0.35A |
| Built-in Protections | TRANSIENT |
| Length | 23.37mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2981/82YN Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the 18-DIP (0.300, 7.62mm) package.This LED driving board is mounted using the mounting type Through Hole.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of Bipolar volts at its maximum output.It comes under the family of MIC2981/82.The termination count is 18.The 18 pins are used to operate the LED driver.Currently, there are 8 functions associated with the lighting driver.Maximum output current falls to 500mA when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 35V.This lighting driver is mounted in the way of Through Hole.The output current is set to 500mA in this case.For normal operation, the supply voltage (Vsup) should be kept above 5V.With the help of this lighting driver, LG-MAX can also be produced.
MIC2981/82YN Features
Supplied from 35V
Additional features like LG-MAX
MIC2981/82YN Applications
There are a lot of Microchip Technology MIC2981/82YN Power Switches ICs applications.
- Smartphone and PDA
- Wireless Headsets
- Notebook and Tablet Computers
- Hot Swap
- Solid-State Drives
- Portable GPS
- Set-top-box
- Hot Swaps
- Solid State Drivers
- USB Power Distribution
