MIC3230YTSE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP-EP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Controller |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Lighting |
| Frequency | 100kHz~1MHz |
| Base Part Number | MIC3230 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 45V |
| Max Supply Current | 10mA |
| Topology | Step-Up (Boost) |
| Internal Switch(s) | No |
| Dimming | PWM |
| Voltage - Supply (Max) | 45V |
| Voltage - Supply (Min) | 6V |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC3230YTSE Overview
In order to save board space, the led driver uses the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 1 outputs are designed into LED drivers.To mount, use Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Controller.It is possible for the led driver ic to function normally at -40°C~125°C TJ.It is clear that Lighting will benefit from the program.Based on the frequency of 100kHz~1MHz, it operates on the basis of a pulse.With a base of 16, this LED light driver is configured.If the voltage supply is below 6V, undetermined failures may occur.Surface Mount has been mounted with the device.The base part number for this LED driver is MIC3230.45V is a reasonable voltage.45V is the maximum value of supply voltage it offers.When the maximum supply current is less than 10mA, this device is capable of providing high efficiency.Operating temperatures should not exceed 125°C in order to ensure stable operation.The operating temperature should be higher than -40°C so as to realize stable operation.There are 1 channels for transmission.
MIC3230YTSE Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz
MIC3230YTSE Applications
There are a lot of Microchip Technology MIC3230YTSE LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- General lighting
- LED headlights
- Refrigeration lighting
- Down lighting
- Constant Voltage Power Source for portable equipment
- Portable lighting
- LED Lightings for Inspection Devices
- LED Lighting PFCs, Linear Dimmable
- Scanners and Handy Terminals
