banner_page

MIC3231YTSE

PMIC MIC3231 16 Pin 100kHz~1MHz 16-TSSOP (0.173, 4.40mm Width) Exposed Pad


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC3231YTSE
  • Package: 16-TSSOP (0.173, 4.40mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 700
  • Description: PMIC MIC3231 16 Pin 100kHz~1MHz 16-TSSOP (0.173, 4.40mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width) Exposed Pad
Number of Pins 16
Supplier Device Package 16-TSSOP-EP
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2011
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Type DC DC Controller
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Applications Lighting
Frequency 100kHz~1MHz
Base Part Number MIC3231
Number of Outputs 1
Max Supply Voltage 45V
Max Supply Current 10mA
Topology Step-Up (Boost)
Internal Switch(s) No
Dimming PWM
Voltage - Supply (Max) 45V
Voltage - Supply (Min) 6V
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC3231YTSE Overview


Using its 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, it is possible to save board space. As part of the design of this LED driver, there are 1 outputs that have been used.It is possible to mount the led driver using Surface Mount.As a result, it appears as a DC DC Controller with a high efficiency and a high degree of reliability.The led light driver is capable of operating at the operating temperature of -40°C~125°C TJ.Taking advantage of Lighting has considerable benefits.As a result, it operates on the basis of frequency 100kHz~1MHz.To form its configuration, there are 16 pins.Undetermined failures will occur if the voltage supply is less than 6V.It's mounted on the way to Surface Mount.LED drivers are found under the base part number MIC3231.It is acceptable for the voltage to be 45V.It is designed to provide a supply voltage of 45V at its maximum.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 10mA.Temperatures should not exceed 125°C in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.

MIC3231YTSE Features


Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz

MIC3231YTSE Applications


There are a lot of Microchip Technology MIC3231YTSE LED Driver ICs applications.

  • Stage Lighting and Signage
  • Panel lighting
  • Architectural lighting
  • Other Electronic Devices
  • White LED Backlight for portable equipment
  • Constant Voltage Power Source for portable equipment
  • Scanners and Handy Terminals
  • Medical surgery lighting
  • LED headlights
  • Dimmable LED for vehicle interiors

Write a review

Note: HTML is not translated!
    Bad           Good