MIC3289-24YD6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | TSOT-23-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 1.2MHz |
| Base Part Number | MIC3289 |
| Number of Outputs | 1 |
| Output Voltage | 24V |
| Operating Supply Voltage | 5V |
| Interface | SPI |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 500mA |
| Quiescent Current | 1.4mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Output Current per Channel | 1.2A |
| Current - Output / Channel | 1.2A Switch |
| Internal Switch(s) | Yes |
| Number of Segments | 6 |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Max) | 6.5V |
| Voltage - Supply (Min) | 2.5V |
| Height | 870μm |
| Length | 2.9mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC3289-24YD6-TR Overview
The SOT-23-6 Thin, TSOT-23-6 package conserves board space. There are 1 outputs used for the design of this LED drivers.For mounting, it uses the Surface Mount method.When it emerges as a DC DC Regulator, it shows high-performance and reliability.-40°C~125°C TJ is the operating temperature and it works fine.It provides considerable benefits for Backlight.It operates at 1.2MHz frequency.With a base of 6, this LED light driver is configured.Undetermined failures may occur when the voltage supply is less than 2.5V.It is estimated that there are 6 segments.Surface Mount is mounted on it.There is a base part number MIC3289 for this LED driver.6.5V is an acceptable voltage.It is designed to provide an output voltage of 6.5V as its maximum value.With a minimum input voltage of 2.5V volts, it can operate.With a minimal supply voltage of 2.5V, it reaches the highest efficiency levels.It is possible to supply current up to 6.5V.It is important not to exceed 125°C in order to ensure stable operation.It is possible to supply the load with 500mA current.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.It is necessary to have 5V voltages inside systems to power them.The electronic component can function fully when the switching frequency is maintained at 1.2MHz.Absent external factors, there is 1.4mA consumption of current.This device has a voltage output of 24V volts.
MIC3289-24YD6-TR Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~125°C TJ
Frequency of 1.2MHz
Operating with the supply voltage of 5V
Switching frequency of 1.2MHz
Output voltage of 24V
MIC3289-24YD6-TR Applications
There are a lot of Microchip Technology MIC3289-24YD6-TR LED Driver ICs applications.
- General lighting
- Dimmable LED for vehicle interiors
- Stage Lighting and Signage
- Sports Facility Lighting
- Stage and Studio lighting
- Museum lighting
- White LED Backlight for portable equipment
- Amusement Machines
- A- lamps
- Panel lighting
