MIC3291-18YML-TR
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Output Voltage | 10V |
| Max Output Current | 500mA |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 20mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Output Current per Channel | 1.2A |
| Current - Output / Channel | 1.2A Switch |
| Internal Switch(s) | Yes |
| Number of Segments | 16 |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Max) | 6.5V |
| Voltage - Supply (Min) | 2.5V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, 8-MLF® |
| Number of Pins | 8 |
| Supplier Device Package | 8-MLF® (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 1.2MHz |
| Base Part Number | MIC3291 |
MIC3291-18YML-TR Overview
On the board, there is also a 8-VFDFN Exposed Pad, 8-MLF? package that saves space.In this LED driver, there are 1 outputs.The mounting method adopted is Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.If the led driver ic is set to -40°C~125°C TJ, it will work normally.Backlight has considerable advantages.The system operates on the basis of the frequency 1.2MHz.The LED light driver has a base configuration of 8 pins.Having a voltage supply below 2.5V can lead to undetermined failures.In total, it includes 16 segments.It has been mounted on Surface Mount.This LED driver has the part number MIC3291.It is acceptable to have a maximum voltage of 6.5V.This device is optimized to deliver a maximum voltage level of 6.5V.A voltage of 2.5V is its minimal input voltage.This system is designed to operate at a minimum voltage of 2.5V to achieve maximum efficiency.The maximum supply current is 6.5V.Operating temperatures should not exceed 125°C in order to ensure stable operation.20mA is the maximum current the load can handle.It is essential to maintain a temperature greater than -40°C in order to achieve stable operation.The electronic component can function fully when the switching frequency is maintained at 1.2MHz.At maximum output current 500mA, it will deliver all the benefits of a LED driver.The voltage at the output terminal is 10V.
MIC3291-18YML-TR Features
Available in the 8-VFDFN Exposed Pad, 8-MLF? package
Operating temperature of -40°C~125°C TJ
Frequency of 1.2MHz
Switching frequency of 1.2MHz
Output voltage of 10V
MIC3291-18YML-TR Applications
There are a lot of Microchip Technology MIC3291-18YML-TR LED Driver ICs applications.
- White LED Backlight for portable equipment
- Dimmable LED for vehicle interiors
- A- lamps
- LED backlight driver for LCD displays for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Stage Lighting and Signage
- General lighting
- OLED power supply for portable equipment
- Other Electronic Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
