MIC3809YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 1MHz |
| Base Part Number | MIC3809 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 14V |
| Number of Channels | 2 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.1V |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 2V~14V |
| Max Supply Current | 2mA |
| Control Features | Frequency Control |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Frequency - Switching | 200kHz |
| Rise Time | 60ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 60 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC3809YM Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tube enclosure. Transistor Driver dc switching's outputs (s) are supported. A 2V~14V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~85°C TA rating. This switching controller can switch at 200kHz. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control. Searching "MIC3809" will return other relevant dc to dc converter ics. In total, switching converter has 8 pins. If you start a project, note down the dc dc regulator's usual output current of 1A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controllers operate at 1MHz frequencies. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 14V. A temperature -40°C lower than -40°C should be maintained. At a temperature around 85°C degrees Celsius, dc regulator should be running. Its supplier dc dc controller package is 8-SOIC. With this controller, the phase is 1. It is recommended that there be 2 channels for high-quality communication. Voltage is rated 15V for maximum supply. The component might suffer damage if the current exceeds 2mA.
MIC3809YM Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Frequency Control
Max Duty Cycle: 50 %
Frequency: 1MHz
MIC3809YM Applications
There are a lot of Microchip Technology MIC3809YM DC to DC converter applications.
- Balance equipment
- Game consoles
- Printing equipment
- Various precision measuring instruments
- Boring machines
- Flaw detection equipment
- Digital display device
- Bending machines
- Program control systems
- Medical equipment
