banner_page

MIC3809YM-TR

2V~14V 8-Pin MIC3809 DC to DC converter IC1 Outputs 200kHz Transistor Driver


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC3809YM-TR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 712
  • Description: 2V~14V 8-Pin MIC3809 DC to DC converter IC1 Outputs 200kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Supplier Device Package 8-SOIC
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2005
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Frequency 1MHz
Base Part Number MIC3809
Function Step-Up/Step-Down
Number of Outputs 1
Output Voltage 12V
Output Type Transistor Driver
Operating Supply Voltage 14V
Max Supply Voltage 15V
Output Configuration Positive, Isolation Capable
Output Current 1A
Voltage - Supply (Vcc/Vdd) 2V~14V
Max Supply Current 2mA
Control Features Frequency Control
Topology Full-Bridge, Half-Bridge, Push-Pull
Frequency - Switching 200kHz
Rise Time 60ns
Synchronous Rectifier No
Fall Time (Typ) 60 ns
Max Frequency 1MHz
Max Duty Cycle 49 %
Duty Cycle (Max) 49%
Clock Sync No
Output Phases 1
Number of Output Phases 1
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC3809YM-TR Overview


Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 2V~14V and has a 2V~14V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. It can switch at 200kHz. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. You can find other relevant dc to dc converter ics by searching "MIC3809". The switching converter has a total of 8 pins. Based on the test statistics, DC regulator outputs voltage 12V. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 49 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 1MHz. Switching controllers work at 1MHz Hz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 14V. At least -40°C°C is recommended. At a temperature around 85°C degrees Celsius, dc regulator should be running. A supplier dc dc controller package of 8-SOIC would be used for this part. This controller switches with 1 phases. When it comes to maximum supply voltage, switching voltage regulators is rated 15V. The component might suffer damage if the current exceeds 2mA.

MIC3809YM-TR Features


Transistor Driver Outputs
Switching Frequency: 200kHz
Frequency Control
Max Duty Cycle: 49 %
Frequency: 1MHz

MIC3809YM-TR Applications


There are a lot of Microchip Technology MIC3809YM-TR DC to DC converter applications.

  • Magnetohydrodynamic power
  • Low output voltage switching power supply circuits
  • Milling machines
  • Overvoltage protection circuits in TV sets
  • Machining centers
  • Printing
  • Remotely powered electric motors
  • Driver circuits
  • Direct power supply system
  • Shearing machines

Write a review

Note: HTML is not translated!
    Bad           Good