MIC3839YMM-TR
| Parameters | |
|---|---|
| Frequency - Switching | 200kHz |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 49 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC3839 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 14V |
| Max Supply Voltage | 15V |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1kA |
| Voltage - Supply (Vcc/Vdd) | 2V~14V |
| Max Supply Current | 20mA |
| Control Features | Current Limit, Frequency Control, Ramp |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
MIC3839YMM-TR Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 2V~14V. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at 200kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control, Ramp. You can find other relevant dc to dc converter ics by searching "MIC3839". 10 pins are present on switching converter. You should note that the dc dc regulator's usual output current is 1kA. Voltage regulator dc to dc is designed to operate at 49 % duty cycle during power-ups and power-downs to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 1MHz. To run the voltage regulator dc to dc safely and reliably, users should apply 14V to the voltage regulator dc to dc. The temperature should be at least -40°C. At85°C, dc regulator should run. Its supplier dc dc controller package is 10-MSOP. Switches with 1 phases are used in this controller. Voltage rating is 15V. Components may be damaged if their current is greater than 20mA.
MIC3839YMM-TR Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Current Limit, Frequency Control, Ramp
Max Duty Cycle: 49 %
MIC3839YMM-TR Applications
There are a lot of Microchip Technology MIC3839YMM-TR DC to DC converter applications.
- Post equipment
- Computed tomography (CT)
- ATMs
- Hydraulic presses
- Combined machine tools
- Digital display device
- Access control systems
- Radio equipment
- Various precision measuring instruments
- Milling machines
