Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2005 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Frequency |
500kHz |
Base Part Number |
MIC38C43 |
Function |
Step-Up, Step-Down, Step-Up/Step-Down |
Number of Outputs |
1 |
Output Voltage |
5V |
Output Type |
Transistor Driver |
Max Supply Voltage |
20V |
Min Supply Voltage |
7.6V |
Operating Supply Current |
4mA |
Output Configuration |
Positive, Isolation Capable |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
7.6V~20V |
Max Supply Current |
6mA |
Quiescent Current |
4mA |
Control Features |
Frequency Control |
Topology |
Buck, Boost, Flyback, Forward Converter |
Frequency - Switching |
500kHz |
Rise Time |
40ns |
Synchronous Rectifier |
Yes |
Fall Time (Typ) |
80 ns |
Max Duty Cycle |
96 % |
Duty Cycle (Max) |
96% |
Clock Sync |
No |
Output Phases |
1 |
Number of Output Phases |
1 |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC38C43YM Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 7.6V~20V voltage are supplied and operated. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Switching can be done at 500kHz with this switching controller. dc dc regulator is made easier with Surface Mount. Frequency Control provides dcdc regulator efficient switching control. MIC38C43 can be used to locate other relevant dc to dc converter ics. There are only 8 pins on switching converter. DC regulator outputs 5V voltage based on test statistics. In most cases, the dc dc regulator's output current is 500mA. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 96 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controllers work at 500kHz Hz. You should keep dc regulator at -40°C degrees or higher. The temperature should not exceed 85°C degrees Celsius. DC switchings that are dormant use 4mA. A 8-SOIC would be the supplier dc dc controller package for this part. It runs on a 4mA supply current. This controller contains 1 phases. Switching voltage regulators is rated 20V in terms of maximum supply voltage. Components may become damaged if their current exceeds 6mA.
MIC38C43YM Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
Max Duty Cycle: 96 %
Frequency: 500kHz
MIC38C43YM Applications
There are a lot of Microchip Technology MIC38C43YM DC to DC converter applications.
- Elevator lighting
- Printing equipment
- Automatic testing equipment
- Special machining machine tools
- Medical equipment
- Solar power plants
- Wide-range voltage regulation circuits
- Large fire protection systems
- Electric water heaters
- Injection molding machinery