MIC38C43YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 500kHz |
| Base Part Number | MIC38C43 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 7.6V |
| Operating Supply Current | 4mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~20V |
| Max Supply Current | 6mA |
| Control Features | Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Frequency - Switching | 500kHz |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Max Duty Cycle | 96 % |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC38C43YMM Overview
Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. Tube solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 7.6V~20V and has a 7.6V~20V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. A switching controller such as this can switch at a value of 500kHz . A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. Other relevant dc to dc converter ics will be returned if you search "MIC38C43". In total, switching converter has 8 pins. DC regulator outputs 5V voltage according to the test statistics. In most cases, the dc dc regulator's output current is 500mA. This information should be noted when you begin working with the component. voltage regulator dc to dcs with a 96 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is 500kHz frequency setting on the switching controller. Keep dc regulator at a temperature of -40°C or above. The temperature should not exceed 85°C degrees Celsius. A supplier dc dc controller package of 8-MSOP would be used for this part. A current of 4mA is supplied to it. Switches with 1 phases are used in this controller. Voltage maximum is rated 20V. There is a possibility that a current higher than 6mA will cause improper operation of the component and possibly damage switching voltage regulators.
MIC38C43YMM Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
Max Duty Cycle: 96 %
Frequency: 500kHz
MIC38C43YMM Applications
There are a lot of Microchip Technology MIC38C43YMM DC to DC converter applications.
- Smoke exhaust equipment
- Printing equipment
- Textile machinery
- Printing
- Various precision measuring detectors
- Industrial robots
- Experimental setup
- Geothermal power
- Balance equipment
- Medical equipment
