MIC38C43YMM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC38C43 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Max Supply Voltage | 20V |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 500A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~20V |
| Max Supply Current | 6mA |
| Control Features | Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Frequency - Switching | 500kHz |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Max Frequency | 500kHz |
| Max Duty Cycle | 96 % |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Height | 920μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC38C43YMM-TR Overview
This switching controller fits most application requirements since it is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. dc motor controller is suitable for 1 output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 7.6V~20V. Suitable for working in an dc switcher that has a -40°C~85°C TA. There is a switch at 500kHz that can be used with this controller. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. A search for "MIC38C43" will reveal other relevant dc to dc converter ics. In total, switching converter has 8 pins. Statistically, the DC regulator outputs 5.1V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 500A. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 96 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulators have a maximum frequency of 500kHz. The temperature should be at least -40°C. A temperature of 85°C degrees Celsius is recommended. It would be 8-MSOP for this part's supplier dc dc controller package. This controller contains 1 phases. According to its maximum supply voltage rating, the voltage controller is rated 20V. Having a current greater than 6mA may result in improper operation and possibly damage to the component.
MIC38C43YMM-TR Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
Max Duty Cycle: 96 %
MIC38C43YMM-TR Applications
There are a lot of Microchip Technology MIC38C43YMM-TR DC to DC converter applications.
- Solar power plants
- Communication system
- Experimental setup
- Electrical distribution systems
- Machining centers
- Textile machinery
- Special machining machine tools
- Packaging
- Correction machines
- Game consoles
