MIC38C45YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 500kHz |
| Base Part Number | MIC38C45 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Number of Channels | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 7.6V |
| Operating Supply Current | 4mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~20V |
| Max Supply Current | 6mA |
| Control Features | Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Frequency - Switching | 500kHz |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Max Duty Cycle | 50 % |
| Isolation | Isolated |
| Duty Cycle (Max) | 50% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC38C45YM Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. A solid enclosure of Tube surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 7.6V~20V. Suitable for a -40°C~85°C TA dc switcher. This switching controller can switch at 500kHz. Surface Mount makes it suitable for general dc dc regulator. Frequency Control is used for efficient switching control in the dcdc regulator. You can find other relevant dc to dc converter ics by searching "MIC38C45". 8 pins are on switching converter. In most cases, the dc dc regulator's output current is 500mA. This information should be noted when you begin working with the component. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controllers operate at 500kHz frequencies. A temperature -40°C lower than -40°C should be maintained. A temperature of 85°C degrees Celsius is recommended. This part's supplier dc dc controller package would be 8-SOIC. There is a 4mA volt supply current. The phase of this controller is 1. For high-quality communication, there are 1 channels. In terms of maximum supply voltage, switching voltage regulators is rated 20V. A current greater than 6mA may result in improper operation and possibly damage to the component.
MIC38C45YM Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
Max Duty Cycle: 50 %
Frequency: 500kHz
MIC38C45YM Applications
There are a lot of Microchip Technology MIC38C45YM DC to DC converter applications.
- Driver circuits
- Electric heating, lighting
- Geothermal power
- Scientific research
- Program control systems
- Household control circuits
- Experimental setup
- Domestic water pumps
- Radio equipment
- Window air conditioners
