MIC38C45YMM
| Parameters | |
|---|---|
| Duty Cycle (Max) | 50% |
| Clock Sync | No |
| Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC38C45 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Max Supply Voltage | 20V |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 500A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~20V |
| Max Supply Current | 6mA |
| Control Features | Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Frequency - Switching | 500kHz |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Max Frequency | 500kHz |
| Max Duty Cycle | 96 % |
MIC38C45YMM Overview
Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 7.6V~20V. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 500kHz . dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. In addition to "MIC38C45", there are other relevant dc to dc converter ics you can find. 8 pins are on switching converter. You should note down the dc dc regulator's usual output current of 500A when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 96 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator500kHz has the maximum frequency. DC regulator should be kept at a temperature of -40°C or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. Its supplier dc dc controller package would be 8-MSOP. Switching voltage regulators is rated 20V in terms of maximum supply voltage. Components may become damaged if their current exceeds 6mA.
MIC38C45YMM Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
Max Duty Cycle: 96 %
MIC38C45YMM Applications
There are a lot of Microchip Technology MIC38C45YMM DC to DC converter applications.
- PSRR circuits
- Computer rooms
- Post equipment
- Low output voltage switching power supply circuits
- Textile machinery
- Shearing machines
- Cutting machine tools
- Adjustable voltage or current linear circuits
- Special machining machine tools
- Linear guide
