MIC38HC43BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDIP-T8 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 7.6V~20V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 8.2V |
| Topology | Buck, Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switching Frequency-Max | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | No |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MIC38HC43BN Overview
In the 8-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tube solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 7.6V~20V voltage are supplied and operated. Worked in a -40°C~85°C TA dc switcher before. The Through Hole allows it to be used for dc dc regulator in general. Frequency Control is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . An array of 8 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. An input voltage of 8.2V is the minimum required for the dc dc voltage regulator. Voltages 30V are the maximum that the dc to dc regulator will accept. The output value is set to the greatest value of 1A. The maximum frequency of this controller is 500kHz.
MIC38HC43BN Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
MIC38HC43BN Applications
There are a lot of Rochester Electronics, LLC MIC38HC43BN DC to DC converter applications.
- Mobile phones
- Computer monitoring equipment of building
- Boring machines
- Balance equipment
- Sensitive electronic devices
- Wind power
- Digital display device
- Telecommunications equipment
- Surge protection circuits
- Production lines
