MIC4120YME
| Parameters | |
|---|---|
| Output Peak Current Limit-Nom | 6A |
| Supply Voltage1-Nom | 18V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.035 μs |
| Built-in Protections | TRANSIENT |
| Height | 1.5mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC4120 |
| Number of Outputs | 1 |
| Output Voltage | 25mV |
| Max Output Current | 6A |
| Nominal Supply Current | 450μA |
| Output Current | 6A |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 45 ns |
| Rise / Fall Time (Typ) | 12ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Turn On Time | 0.035 μs |
MIC4120YME Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package is used.A packaging method of Tube is used.There is a mounting bracket in the way of Surface Mount.By using 4.5V~20V supply voltage, it is able to demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Input type of Non-Inverting is used.8 terminations constitute its foundation.Under its base part number MIC4120, various related parts can be found.In this case, Surface Mount indicates how the device is to be mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.Specification is for 18V supply voltage operation.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.There is a maximum output current of 6A.Based on its basis, it integrates 1 outputs.This device supports a current output of 6A at the output.When this voltage is produced, it is marked as 25mV.
MIC4120YME Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
MIC4120YME Applications
There are a lot of Microchip Technology MIC4120YME gate drivers applications.
- DC-DC Converters
- Commercial and agricultural vehicles (CAV)
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Supplies for Motor Control
- A/D drivers
- Broadcast equipment
- Portable computers
- RGB applications
- High-voltage isolated DC-DC converters
- AC-DC Inverters
