MIC4123YME
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC4123 |
| Max Output Current | 3A |
| Nominal Supply Current | 2.5mA |
| Output Current | 3A |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 11ns 11ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Built-in Protections | TRANSIENT |
| Height | 1.5mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4123YME Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package.The packaging method is indicated by Tube.For its configuration, it incorporates 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 4.5V~20V demonstrates its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Inverting is the input type used in this program.Its configuration starts with 8 terminations.The base part number MIC4123 refers to a number of related parts.Mounting the device requires Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 3A.The output current of this device can be set to 3A.
MIC4123YME Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
MIC4123YME Applications
There are a lot of Microchip Technology MIC4123YME gate drivers applications.
- Refrigerator
- Topologies
- Power factor correction (PFC) circuits
- Industrial Modules
- Isolated Gate Driver Supplies
- Isolated switch mode power supplies (SMPS)
- Automotive Applications
- Uninterruptible Power Supplies (UPS)
- LCD/LCoS/DLP portable and embedded pico projectors
- Portable Media Players
