MIC4124YME
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC4124 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Nominal Supply Current | 2.5mA |
| Output Current | 3A |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 11ns 11ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Built-in Protections | TRANSIENT |
| Height | 1.5mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4124YME Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package.Tube represents the packaging method.In this case, gate drivers is mounted along the way of Surface Mount.By using 4.5V~20V supply voltage, it is able to demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is used as its input type.8 terminations constitute its foundation.Many related parts can be found under its base part number MIC4124.Mounting the device requires Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.As a maximum, there is 3A limit to the output current.For its basis, there are 2 outputs integrated.An output current of 3A is supported.
MIC4124YME Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
MIC4124YME Applications
There are a lot of Microchip Technology MIC4124YME gate drivers applications.
- Refrigerator
- Portable computers
- Commercial air-conditioning (CAC)
- Motor Drives
- Telecom switch mode power supplies
- 3-Phase Motor Inverter Driver
- High frequency line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- UPS systems
- Active filtering
