MIC4127YMME
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP-EP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~20V |
| Base Part Number | MIC4127 |
| Number of Outputs | 2 |
| Max Output Current | 1.5A |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1.4mA |
| Output Current | 1.5A |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 13ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 20ns 18ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 900μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4127YMME Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is adopted for higher flexibility.Tube represents the packaging method.This configuration includes 2 drivers.It's mounted on the way to Surface Mount.In the absence of a 4.5V~20V supply voltage, its superiority can be demonstrated.A gate type of N-Channel MOSFET has been used in its design.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is used as its input type.There are numerous related parts listed under its base part number MIC4127.Surface Mount is the way it takes to mount the device.In the device, there are 8 pins.Mosfet driver is possible for the output current to be as low as 1.5A.There are 2 outputs integrated for its basis.An output current of 1.5A is supported.A maximum operating temperature of 125°C is permissible.Mosfet gate drivers is permissible to operate at a minimum temperature of -40°C.In order for the device to operate, the supply voltage must be 20V.4.5V is the minimum voltage required to operate it.
MIC4127YMME Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
MIC4127YMME Applications
There are a lot of Microchip Technology MIC4127YMME gate drivers applications.
- High frequency line drivers
- Topologies
- Uninterruptible Power Supplies (UPS)
- Solar power supplies
- High-speed communications
- Head-up and Head mounted displays
- Telecom switch mode power supplies
- 3-Phase Motor Inverter Driver
- Isolated Supplies for controller area network (CAN),
- Pulse transformer drivers
