MIC4128YMME-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP-EP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~20V |
| Base Part Number | MIC4128 |
| Number of Outputs | 2 |
| Max Output Current | 1.5A |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 4.5V |
| Propagation Delay | 60 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 20ns 18ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MIC4128YMME-TR Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package provides greater flexibility.A packaging method of Tape & Reel (TR) is indicated.This configuration includes 2 drivers.Surface Mount is mounted in the way.When the supply voltage is 4.5V~20V it is able to demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.Temperature range -40°C~125°C TJ is allowed for this device.Inverting, Non-Inverting is used as the input type in this program.The base part number MIC4128 refers to a number of related parts.Surface Mount is the way it takes to mount the device.Devices have 8 pins available.1.5A is the maximum output current.For its basis, there are 2 outputs integrated.125°C is the maximum operating temperature that can be tolerated.There is a minimum operating temperature of -40°C.For operation, the supply voltage of 20V is the maximum value.A supply voltage of 4.5V is the minimum value required to operate the device.
MIC4128YMME-TR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
MIC4128YMME-TR Applications
There are a lot of Microchip Technology MIC4128YMME-TR gate drivers applications.
- Topologies
- High-voltage isolated DC-DC converters
- Telecom switch mode power supplies
- Portable Media Players
- Smart Phones
- Digitally controlled power supplies
- Motor Controls
- PCMCIA applications
- Isolated Supplies for controller area network (CAN),
- Pulse transformer drivers
