MIC4416YM4-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Supplier Device Package | SOT-143 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | IttyBitty® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 600mW |
| Voltage - Supply | 4.5V~18V |
| Base Part Number | MIC4416 |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Max Output Current | 1.2A |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 370μA |
| Output Current | 1.2A |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 42 ns |
| Max Output Voltage | 18V |
| Rise Time | 24ns |
| Fall Time (Typ) | 28 ns |
| Turn-Off Delay Time | 42 ns |
| Rise / Fall Time (Typ) | 14ns 16ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.2A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.02mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4416YM4-TR Overview
A higher level of flexibility is provided by its TO-253-4, TO-253AA package.Tape & Reel (TR) represents the packaging method.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.Surface Mount is mounted in the way of the device.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.A gate type of N-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.Numerous related parts can be found under its base part number MIC4416.Mounting the device requires Surface Mount.As a result, it is configured with 4 pins when it is designed.There is an output current limit of 1.2A for this device.Mosfet driver is based on a basis of 1 outputs that have been integrated.The output current can be set to 1.2A.Temperatures greater than 85°C are not allowed.The allowable minimum value of operating temperature is -40°C.Having the maximum power dissipation of 600mW indicates its maximum capacity to conduct power losses without overheating.In order for the device to operate, the supply voltage must be 18V.The supply voltage of 4.5V is its minimum value for operation.When this voltage is produced, it is marked as 20V.Gate drivers of this type are included in the IttyBitty? series.Operation of the device is limited to 1 channels.Mosfet driver ic is recommended that the maximum output voltage remain at 18V.
MIC4416YM4-TR Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
4 pins
Maximum power dissipation of 600mW
Operating with the supply voltage of IttyBitty?
MIC4416YM4-TR Applications
There are a lot of Microchip Technology MIC4416YM4-TR gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Head-up and Head mounted displays
- High-voltage isolated DC-DC converters
- Industrial Motor Inverter - Power Tools, Robotics
- Welding
- Commercial air-conditioning (CAC)
- Portable Navigation Devices
- Line drivers
- High power buffers
- Digitally controlled power supplies
