MIC4420YM-TR
| Parameters | |
|---|---|
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 18 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 18 ns |
| Rise / Fall Time (Typ) | 12ns 13ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.04W |
| Voltage - Supply | 4.5V~18V |
| Base Part Number | MIC4420 |
| Number of Outputs | 1 |
| Output Voltage | 25mV |
| Max Output Current | 6A |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 450μA |
| Power Dissipation | 1.04W |
| Output Current | 6A |
MIC4420YM-TR Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Tape & Reel (TR) is the packaging method.The configuration is supported by 1 drivers.It's mounted on the way to Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Non-Inverting is used as the input type in this program.There are various related parts under its base part number MIC4420.Mosfet driver is mounted using the Surface Mount method.In the device, there are 8 pins.Mosfet driver is possible to achieve a maximum output current of 6A.The basis of this system consists of 1 outputs.The output current of this device can be set to 6A.The allowable maximum value of operating temperature is 150°C.Minimum operating temperatures are allowed to be -40°C.Based on the maximum power dissipation of 1.04W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Its maximum operating voltage is 18V.This device operates at 4.5V as the minimum supply voltage.As a result, a voltage of 25mV is produced.A total of 1 channels are configured for operation.
MIC4420YM-TR Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.04W
MIC4420YM-TR Applications
There are a lot of Microchip Technology MIC4420YM-TR gate drivers applications.
- RGB applications
- Video amplifiers
- Industrial motor drives - compact, standard, premium, servo drives
- Solar inverters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Portable Media Players
- High current laser/LED systems
- Portable Navigation Devices
- AC-DC Inverters
- Commercial and agricultural vehicles (CAV)
