MIC4422AYN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 1.478W |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MIC4422 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1.478W |
| Output Current | 9A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 68 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 20ns |
| Fall Time (Typ) | 24 ns |
| Turn-Off Delay Time | 60 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 24ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Height Seated (Max) | 3.43mm |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MIC4422AYN Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Tube is the form of the package.Its recommended mounting way is Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.N-Channel MOSFET is the gate type used for this design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Non-Inverting is the input type used in this program.The configuration is based on 8 terminations.There are various related parts under its base part number MIC4422.The device is mounted using Through Hole.Devices have 8 pins available.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.9A is the maximum output current.The basis of the model has 1 outputs integrated.This device is capable of delivering 9A current.Its maximum power dissipation of 1.478W shows its power loss capacity without overheating.Mosfet gate drivers receives an input of STANDARD.
MIC4422AYN Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1.478W
MIC4422AYN Applications
There are a lot of Microchip Technology MIC4422AYN gate drivers applications.
- High current laser/LED systems
- Portable Navigation Devices
- Isolated Gate Driver Supplies
- Video amplifiers
- UPS systems
- DC-DC Converters
- Motor Drives
- Uninterruptible Power Supplies (UPS)
- Automotive Applications
- LCD/LCoS/DLP portable and embedded pico projectors
