MIC4422AZN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MIC4422 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Power Dissipation | 1.478W |
| Supply Current-Max | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 68 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 60 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 24ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Height Seated (Max) | 3.43mm |
| Length | 9.525mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MIC4422AZN Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Tube represents the packaging method.This device is equipped with 1 drivers for its configuration.Its recommended mounting way is Through Hole.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.There is a temperature range for this device of 0°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number MIC4422.Devices are mounted by Through Hole.When designing, the device is configured with 8 pins.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 9A limit to the output current.Its input is characterized by STANDARD.During operation, the supply current may not exceed 3mA.
MIC4422AZN Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
MIC4422AZN Applications
There are a lot of Microchip Technology MIC4422AZN gate drivers applications.
- Pulse transformer drivers
- Refrigerator
- Smart Phones
- Portable Media Players
- Industrial motor drives - compact, standard, premium, servo drives
- Active filtering
- UPS systems
- General Purpose 3-Phase Inverter
- White Goods - Air Conditioner, Washing Machine,
- Motor Drives
