MIC4422AZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 1.756kW |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~18V |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MIC4422 |
| JESD-30 Code | R-PSFM-T5 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1.756kW |
| Output Current | 9A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 68 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 20ns |
| Fall Time (Typ) | 24 ns |
| Turn-Off Delay Time | 60 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 20ns 24ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.08 μs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.08 μs |
| RoHS Status | ROHS3 Compliant |
MIC4422AZT Overview
A higher degree of flexibility is achieved by adopting its TO-220-5 package.Gate drivers is packaged in the way of Tube.For its configuration, it incorporates 1 drivers.In this case, gate drivers is mounted along the way of Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.Gate type N-Channel MOSFET is designed for it.Temperature range 0°C~150°C TJ is allowed for this device.Mosfet driver accepts input of type Non-Inverting.The configuration starts with 5 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MIC4422.Mounting the device requires Through Hole.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There is a maximum output current of 9A.Mosfet gate drivers supports a current output of 9A.According to its maximum power dissipation, 1.756kW is capable of conducting and transferring a large amount of power without overheating.The input is characterized by STANDARD.
MIC4422AZT Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
Maximum power dissipation of 1.756kW
MIC4422AZT Applications
There are a lot of Microchip Technology MIC4422AZT gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Solar inverters
- High-speed communications
- Pulse transformer drivers
- High-voltage isolated DC-DC converters
- Isolated Supplies for controller area network (CAN),
- serial peripheral interface (SPI), I2C
- Topologies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Head-up and Head mounted displays
