MIC4423YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 960mW |
| Voltage - Supply | 4.5V~18V |
| Base Part Number | MIC4423 |
| Number of Outputs | 2 |
| Output Voltage | 25mV |
| Max Output Current | 3A |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1.5mA |
| Output Current | 3A |
| Propagation Delay | 38 ns |
| Input Type | Inverting |
| Turn On Delay Time | 33 ns |
| Rise Time | 23ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 33 ns |
| Rise / Fall Time (Typ) | 28ns 32ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Max Junction Temperature (Tj) | 150°C |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.73mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4423YM Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Tube represents the package.There are 2 drivers installed for this device.Surface Mount is mounted in the way of the device.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.There is a temperature range for this device of -40°C~150°C TJ.The input type is Inverting.There are various parts that can be found under its base part number MIC4423.The device is mounted using Surface Mount.Devices have 8 pins available.Mosfet driver is possible to achieve a maximum output current of 3A.The basis of the model has 2 outputs integrated.The output current supported by the device is 3A.85°C is the maximum operating temperature that can be tolerated.Minimum operating temperatures are allowed to be -40°C.Having the maximum power dissipation of 960mW indicates its maximum capacity to conduct power losses without overheating.When the supply voltage is 18V, it is at its maximum operation.4.5V is the minimum voltage required to operate it.Mosfet gate drivers outputs 25mV as voltage.The device is configured to operate on 2 channels.
MIC4423YM Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 960mW
MIC4423YM Applications
There are a lot of Microchip Technology MIC4423YM gate drivers applications.
- Power factor correction (PFC) circuits
- Pulse transformer drivers
- High power buffers
- Industrial Motor Inverter - Power Tools, Robotics
- DC-DC Converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Dual-Battery Systems
- Isolated Supplies for controller area network (CAN),
- Portable computers
- Motor Controls
