MIC4427YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | MIC4427 |
| Number of Outputs | 2 |
| Output Voltage | 25mV |
| Max Output Current | 1.5A |
| Nominal Supply Current | 1.5mA |
| Output Current | 1.5A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 20 ns |
| Turn-Off Delay Time | 40 ns |
| Rise / Fall Time (Typ) | 20ns 29ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 3.3mm |
| Length | 9.53mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4427YN Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Gate drivers is packaged in the way of Tube.Its recommended mounting way is Through Hole.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is used as the input type in this program.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number MIC4427.Through Hole is the way it takes to mount the device.A total of 8 pins are available on the device.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 1.5A.The basis of this model has 2 outputs integrated.Mosfet gate drivers supports a current output of 1.5A.A voltage of 25mV is output by this device.
MIC4427YN Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
MIC4427YN Applications
There are a lot of Microchip Technology MIC4427YN gate drivers applications.
- Telecom switch mode power supplies
- Isolated Supplies for controller area network (CAN),
- Welding
- Isolated Supplies for Motor Control
- Refrigerator
- DC/DC converters
- High frequency line drivers
- AC-DC Inverters
- Industrial Motor Inverter - Power Tools, Robotics
- Pulse transformer drivers
