MIC4427ZN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MIC4427 |
| Qualification Status | Not Qualified |
| Output Voltage | 25mV |
| Max Output Current | 1.5A |
| Nominal Supply Current | 1.5mA |
| Output Current | 1.5A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 32 ns |
| Turn-Off Delay Time | 40 ns |
| Rise / Fall Time (Typ) | 20ns 29ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4427ZN Overview
The 8-DIP (0.300, 7.62mm) package offers greater flexibility.The packaging method is indicated by Tube.Gate drivers is configured wGate driversh 2 drivers.Ideally, it should be mounted in the direction of Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.A gate type of N-Channel, P-Channel MOSFET has been used in its design.In this device, temperatures must not exceed 0°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.It's configured with 8 terminations.The base part number MIC4427 refers to a number of related parts.In this case, Through Hole indicates how the device is to be mounted.At the time of design, it is configured with 8 pins.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.As a maximum, there is 1.5A limit to the output current.The output current supported by the device is 1.5A.Mosfet gate drivers outputs 25mV as voltage.
MIC4427ZN Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
MIC4427ZN Applications
There are a lot of Microchip Technology MIC4427ZN gate drivers applications.
- Industrial Modules
- Isolated switch mode power supplies (SMPS)
- Motor Control
- High current laser/LED systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Controls
- Dual-Battery Systems
- Commercial air-conditioning (CAC)
- Isolated Gate Driver Supplies
- Industrial Motor Inverter - Power Tools, Robotics
