MIC4428YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~18V |
| Base Part Number | MIC4428 |
| Number of Outputs | 2 |
| Output Voltage | 25mV |
| Max Output Current | 1.5A |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1.5mA |
| Output Current | 1.5A |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 20 ns |
| Turn-Off Delay Time | 40 ns |
| Rise / Fall Time (Typ) | 20ns 29ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4428YM Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tube is the form of the package.For its configuration, it incorporates 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.This device allows temperatures in the range of -40°C~150°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.You will find various related parts under the base part number MIC4428.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 8 pins.As a maximum, there is 1.5A limit to the output current.Mosfet driver is based on a basis of 2 outputs that have been integrated.The output current of this device can be set to 1.5A.A maximum operating temperature of 85°C is permissible.Minimum operating temperatures are allowed to be -40°C.For operation, the supply voltage of 18V is the maximum value.The supply voltage of 4.5V is its minimum value for operation.When this voltage is produced, it is marked as 25mV.Operating channels are set to 2.
MIC4428YM Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
MIC4428YM Applications
There are a lot of Microchip Technology MIC4428YM gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Motor controllers
- Topologies
- Motor Drives
- Portable Navigation Devices
- Portable computers
- Smart Phones
- Digitally controlled power supplies
- Power factor correction (PFC) circuits
- DC-DC Converters
