MIC4451YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 960mW |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MIC4451 |
| Output Voltage | 25mV |
| Max Output Current | 12A |
| Number of Channels | 1 |
| Nominal Supply Current | 450μA |
| Power Dissipation | 960mW |
| Output Current | 12A |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 80 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 80 ns |
| Rise / Fall Time (Typ) | 20ns 24ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Input Current | 10μA |
| Output Peak Current Limit-Nom | 12A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 12A 12A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 3.43mm |
| Length | 9.65mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4451YN Overview
There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is used.There is a mounting bracket in the way of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate type IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~85°C TA.Mosfet driver accepts input of type Inverting.8 terminations constitute its foundation.Many related parts can be found under its base part number MIC4451.Through Hole is the way it takes to mount the device.When the device is designed, it has 8 pins.A voltage of 5V is required for its operation.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is a maximum output current of 12A that can be achieved.The device is capable of delivering a current of 12A.This device has a maximum power dissipation of 960mW, indicating that it is capable of reducing power loss without overheating.In this case, it outputs 25mV voltage.Mosfet gate drivers is configured wMosfet gate driversh 1 channels for operation.
MIC4451YN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 960mW
MIC4451YN Applications
There are a lot of Microchip Technology MIC4451YN gate drivers applications.
- Motor Control
- Uninterruptible Power Supplies (UPS)
- Telecom switch mode power supplies
- Industrial Modules
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- PCMCIA applications
- Industrial motor drives - compact, standard, premium, servo drives
- Head-up and Head mounted displays
- Topologies
- AC-DC Inverters
