MIC4452YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.04W |
| Voltage - Supply | 4.5V~18V |
| Base Part Number | MIC4452 |
| Number of Outputs | 1 |
| Output Voltage | 25mV |
| Max Output Current | 12A |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 450μA |
| Power Dissipation | 1.04W |
| Output Current | 12A |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 80 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 80 ns |
| Rise / Fall Time (Typ) | 20ns 24ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 12A 12A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4452YM Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.A package of Tube has been used.The configuration is supported by 1 drivers.Its recommended mounting way is Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This gate type has a IGBT, N-Channel MOSFET design.The allowable temperature range that this device can be operated in is -40°C~85°C TA.Mosfet driver accepts input of type Non-Inverting.Mosfet driver is possible to find various related parts under Mosfet drivers base part number MIC4452.In this case, Surface Mount indicates how the device is to be mounted.During design, it is configured with 8 pins.Mosfet driver is possible for the output current to be as low as 12A.For its basis, 1 outputs are integrated.Mosfet driver supports an output current of 12A.There is a maximum operating temperature of 85°C.Temperatures below -40°C are allowed as the minimum.This device has a maximum power dissipation of 1.04W, indicating that it is capable of reducing power loss without overheating.The supply voltage of 18V is its maximum value for operation.This device is designed to operate with a voltage of 4.5V.In this case, it produces a voltage of 25mV.A total of 1 channels are configured for operation.
MIC4452YM Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 1.04W
MIC4452YM Applications
There are a lot of Microchip Technology MIC4452YM gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Automotive Applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Gate Driver Supplies
- Broadcast equipment
- PCMCIA applications
- Motor Control
- Digitally controlled power supplies
- Isolated Supplies for controller area network (CAN),
- Isolated switch mode power supplies (SMPS)
