MIC4452YM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.04W |
| Voltage - Supply | 4.5V~18V |
| Base Part Number | MIC4452 |
| Number of Outputs | 1 |
| Output Voltage | 25mV |
| Max Output Current | 12A |
| Number of Channels | 1 |
| Voltage | 20V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 450μA |
| Power Dissipation | 1.04W |
| Output Current | 12A |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 80 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 80 ns |
| Rise / Fall Time (Typ) | 20ns 24ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 12A 12A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4452YM-TR Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Gate drivers is package in Tape & Reel (TR) case.This configuration includes 1 drivers.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of IGBT, N-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~85°C TA.A type of Non-Inverting is used for input in this program.Numerous related parts can be found under its base part number MIC4452.Mounting the device requires Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.The maximum output current can amount to 12A.For its basis, there are 1 outputs integrated.Mosfet gate drivers can deliver a current of 12A.A maximum operating temperature of 85°C is permissible.Mosfet gate drivers is permissible to operate at a minimum temperature of -40°C.The maximum power dissipation of 1.04W shows its maximum capability to transfer and conduct power loss without overheating.The supply voltage of 18V is its maximum value for operation.In order for the device to operate, a supply voltage of 4.5V must be applied.In this case, the voltage output is 25mV.Operation is configured with 1 channels.
MIC4452YM-TR Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 1.04W
MIC4452YM-TR Applications
There are a lot of Microchip Technology MIC4452YM-TR gate drivers applications.
- 3-Phase Motor Inverter Driver
- Line drivers
- DC-DC Converters
- Portable Media Players
- Isolated switch mode power supplies (SMPS)
- Portable Navigation Devices
- Uninterruptible Power Supplies (UPS)
- RGB applications
- Power factor correction (PFC) circuits
- Head-up and Head mounted displays
