MIC4452YN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 960mW |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MIC4452 |
| Output Voltage | 25mV |
| Max Output Current | 12A |
| Number of Channels | 1 |
| Nominal Supply Current | 450μA |
| Power Dissipation | 960mW |
| Output Current | 12A |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 80 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 80 ns |
| Rise / Fall Time (Typ) | 20ns 24ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 12A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 12A 12A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 3.43mm |
| Length | 9.65mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4452YN Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Tube is the form of the package.Its recommended mounting way is Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.This device is designed with a IGBT, N-Channel MOSFET gate type.-40°C~85°C TA is the allowed temperature range for this device.A type of Non-Inverting is used for input in this program.The configuration starts with 8 terminations.Numerous related parts can be found under its base part number MIC4452.Mosfet driver is mounted using Through Hole.When the device is designed, it has 8 pins.Specification is for 5V supply voltage operation.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 12A volts.This device supports a current output of 12A at the output.Its maximum power dissipation of 960mW shows its power loss capacity without overheating.A voltage of 25mV is output by this device.The device is configured to operate on 1 channels.
MIC4452YN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 960mW
MIC4452YN Applications
There are a lot of Microchip Technology MIC4452YN gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Solar inverters
- Automotive Applications
- High frequency line drivers
- Video amplifiers
- Motor Controls
- Isolated Gate Driver Supplies
- Motor Drives
- Smart Phones
- High-voltage isolated DC-DC converters
