MIC4467ZN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 1.5W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 4 |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MIC4467 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.2A |
| Nominal Supply Current | 200μA |
| Power Dissipation | 1.5W |
| Output Current | 1.2A |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 75 ns |
| Rise / Fall Time (Typ) | 14ns 13ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 1.2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 5.588mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4467ZN Overview
There is greater flexibility with the 14-DIP (0.300, 7.62mm) package.The packaging method is indicated by Tube.This configuration includes 4 drivers.There is a mounting bracket in the way of Through Hole.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type N-Channel, P-Channel MOSFET is designed for it.This device allows temperatures in the range of 0°C~70°C TA.The input type is Inverting.14 terminations constitute its foundation.You will find various related parts under the base part number MIC4467.Mounting the device requires Through Hole.When designing, the device is configured with 14 pins.The interface chip of the system is NAND GATE BASED MOSFET DRIVER.There is an output current limit of 1.2A for this device.Mosfet gate drivers supports a current output of 1.2A.Its maximum power dissipation of 1.5W also demonstrates its maximum ability to transfer power without overheating.
MIC4467ZN Features
Embedded in the Tube package
4 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
14 pins
Maximum power dissipation of 1.5W
MIC4467ZN Applications
There are a lot of Microchip Technology MIC4467ZN gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- DC/DC converters
- General Purpose 3-Phase Inverter
- Industrial Modules
- Solar power supplies
- Industrial Motor Inverter - Power Tools, Robotics
- Industrial Power Supplies
- Motor Drives
- Motor controllers
- Automotive Applications
