MIC44F18YMME-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP-EP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~13.2V |
| Base Part Number | MIC44F18 |
| Number of Outputs | 1 |
| Max Output Current | 6A |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 4.5V |
| Propagation Delay | 15 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| Logic Voltage - VIL, VIH | 1.607V 1.615V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC44F18YMME-TR Overview
Gate drivers provides greater flexibilGate driversy to use the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.Tape & Reel (TR) represents the packaging method.For its configuration, it incorporates 1 drivers.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is 4.5V~13.2V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a P-Channel MOSFET gate.Temperature range -40°C~125°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.There are various related parts under its base part number MIC44F18.The mount method is Surface Mount.When the device is designed, it has 8 pins.The maximum output current can amount to 6A.Based on its basis, it integrates 1 outputs.Operating temperatures cannot exceed 125°C.Operating temperatures can be as low as -40°C.The supply voltage of 13.2V is its maximum value for operation.4.5V is the minimum voltage required to operate it.
MIC44F18YMME-TR Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of P-Channel MOSFET
8 pins
MIC44F18YMME-TR Applications
There are a lot of Microchip Technology MIC44F18YMME-TR gate drivers applications.
- Welding
- Power factor correction (PFC) circuits
- Pulse transformer drivers
- RGB applications
- Multicolor LED/laser displays
- Industrial Power Supplies
- Isolated Supplies for controller area network (CAN),
- Motor Controls
- Smart Phones
- Portable Navigation Devices
