MIC44F20YMME
| Parameters | |
|---|---|
| Input Type | Inverting |
| Turn On Delay Time | 15 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| Logic Voltage - VIL, VIH | 1.607V 1.615V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP-EP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~13.2V |
| Base Part Number | MIC44F20 |
| Number of Outputs | 1 |
| Max Output Current | 6A |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 5μA |
| Output Current | 6A |
| Propagation Delay | 15 ns |
MIC44F20YMME Overview
Gate drivers provides greater flexibilGate driversy to use the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.A package of Tube has been used.The configuration is supported by 1 drivers.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~13.2V supply voltage, its superiority can be demonstrated.This device is designed with a N-Channel MOSFET gate type.Temperature range -40°C~125°C TJ is allowed for this device.The input type for this program is Inverting.You will find various related parts under the base part number MIC44F20.Mosfet driver is mounted using Surface Mount.During design, it is configured with 8 pins.There is a maximum output current of 6A.The basis of this system consists of 1 outputs.An output current of 6A is supported.Mosfet gate drivers is permissible to set the operating temperature to 125°C.Temperatures below -40°C are allowed as the minimum.The supply voltage of 13.2V is its maximum value for operation.Its minimum operating voltage is 4.5V.
MIC44F20YMME Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
MIC44F20YMME Applications
There are a lot of Microchip Technology MIC44F20YMME gate drivers applications.
- Head-up and Head mounted displays
- Multicolor LED/laser displays
- Motor Control
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Automotive Applications
- High-voltage isolated DC-DC converters
- High current laser/LED systems
- RGB applications
- Motor controllers
- Uninterruptible Power Supplies (UPS)
