MIC4575-5.0WU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Supplier Device Package | TO-263-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC4575 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Efficiency | 77 % |
| Voltage - Input (Max) | 24V |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 1A |
| Voltage - Input (Min) | 4V |
| Output Configuration | Positive |
| Current - Output | 1.7A Switch |
| Max Output Voltage | 5V |
| Voltage - Output (Min/Fixed) | 5V |
| Topology | Buck, Buck-Boost |
| Min Input Voltage | 4V |
| Frequency - Switching | 200kHz |
| Max Input Voltage | 24V |
| Synchronous Rectifier | No |
| Min Output Voltage | 5V |
| Nominal Output Voltage | 5V |
| Height | 4.597mm |
| Length | 10.67mm |
| Width | 9.169mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4575-5.0WU Overview
For optimal performance, this voltage regulator uses the Bulk package. For space-saving purposes, this voltage regulator is available in the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package. The voltage regulator is configured with 1 outputs. There are output pins on this DC DC switching regulator that generate Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. A DC-DC switching regulator of this type operates at a switching frequency of 200kHz. Input voltage 4V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 5V. DC DC switching regulator's maximum design flexibility comes from its output current of 1.7A Switch. There is a voltage regulator maximum input voltage of 24V. This DC/DC regulator belongs to the MIC4575 family. Voltage regulator is capable of giving voltage at 5V volts. 5 pins are used for switching regulator operation. Ideally this switch regulator should have an output voltage of about 5V at the very least. A maximum output current of 1A A is available to meet the switching regulator operation requirements. DC DC switching regulator offers a maximum output voltage of 5V as its maximum output voltage. Stable operation is enabled by the high-limit maximum operating temperature 85°C of harley voltage regulator. The voltage regulator 12v must operate at a minimum operating temperature of -40°C in order to remain reliable. The voltage regulator 12v supports a dc to dc voltage regulator's minimum input voltage of 4V for its input. Designed to sustain a maximum input voltage of 24V, this DC-DC switching regulator maintains a maximum output voltage of DC.
MIC4575-5.0WU Features
1 outputs
5 pins
MIC4575-5.0WU Applications
There are a lot of Microchip Technology MIC4575-5.0WU Voltage Regulators applications.
- Scientific testing
- Thermal power
- Ball screw pair
- Bending machines
- Program control systems
- Flaw detection equipment
- Linear guide
- Experimental setup
- Textile machinery
- Gear/thread machining machines
