MIC4604YM-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 5.25V~16V |
| Base Part Number | MIC4604 |
| Number of Outputs | 1 |
| Max Output Current | 1A |
| Operating Supply Voltage | 12V |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 5.5V |
| Nominal Supply Current | 48μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Turn-Off Delay Time | 10 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MIC4604YM-T5 Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) represents the package.A total of 2 drivers are integrated into its configuration.Its recommended mounting way is Surface Mount.In the absence of a 5.25V~16V supply voltage, its superiority can be demonstrated.The gate type on this device is N-Channel MOSFET.This device can operate at temperatures up to -40°C~125°C TJ.Non-Inverting is the input type used in this program.The base part number MIC4604 refers to a number of related parts.The device is mounted with Surface Mount.In the device, there are 8 pins.Mosfet driver is possible to achieve a maximum output current of 1A.For its basis, 1 outputs are integrated.Temperatures greater than 125°C are not allowed.The allowable minimum value of operating temperature is -40°C.16V is its maximum operating voltage.This device operates at 5.5V as the minimum supply voltage.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.
MIC4604YM-T5 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
MIC4604YM-T5 Applications
There are a lot of Microchip Technology MIC4604YM-T5 gate drivers applications.
- AC-DC Inverters
- Motor Controls
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Commercial and agricultural vehicles (CAV)
- Telecom switch mode power supplies
- Isolated Supplies for Motor Control
- Multicolor LED/laser displays
- Refrigerator
- Industrial Modules
- Dual-Battery Systems
