MIC4604YMT-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFDFN Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-TDFN (2.5x2.5) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 5.25V~16V |
| Base Part Number | MIC4604 |
| Number of Outputs | 1 |
| Max Output Current | 1A |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 5.5V |
| Nominal Supply Current | 48μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Turn-Off Delay Time | 75 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MIC4604YMT-T5 Overview
The 10-UFDFN Exposed Pad package provides greater flexibility.A packaging method of Tape & Reel (TR) is used.Configuration is based on 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 5.25V~16V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is used as the input type.Under its base part number MIC4604, various related parts can be found.Devices are mounted by Surface Mount.During design, it is configured with 10 pins.The maximum output current can amount to 1A.Based on its basis, it integrates 1 outputs.125°C is the maximum operating temperature that can be tolerated.Temperatures below -40°C are allowed as the minimum.For operation, the supply voltage of 16V is the maximum value.In order for the device to operate, a supply voltage of 5.5V must be applied.
MIC4604YMT-T5 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
MIC4604YMT-T5 Applications
There are a lot of Microchip Technology MIC4604YMT-T5 gate drivers applications.
- Motor Drives
- High power buffers
- Isolated Gate Driver Supplies
- Active filtering
- Industrial Power Supplies
- Dual-Battery Systems
- Refrigerator
- LCD/LCoS/DLP portable and embedded pico projectors
- Portable Navigation Devices
- 3-Phase Motor Inverter Driver
